Equipment Calibration

Equipment Calibration

The Equipment Calibration window can be used to add calibration details required for the equipment, such as calibration dates, together with comments.

 

Open the Calibration window

  • Select the Edit Calibration button in the equipment row against which you wish to enter calibration data. The Calibration window appears.

 

Add a Calibration

  1. Select the Edit Calibration button in the equipment row for entry of its calibration details. The Calibration window will appear.
  2. Click the Add button to insert a new calibration row.
  3. Click in the Calibration Date cell and enter the date of the equipment calibration (required).
  4. Click in the Next Calibration Date cell and enter the date of the next calibration for this piece of equipment (optional).
  5. Click against the Comment cell. This will open up a Detail window. Enter any commentary about your calibration here.
  6. Then click OK.
  7. To save and continue editing the Calibrations, click Save in the Quick Access Toolbar. Then click Close when you are done.
  8. To save and close the Calibrations window, click Save.

 

Modify a Calibration

Method 1

  1. Within the Calibrations window, modify the calibration details as required. Any changes will appear in italics.
  2. To save and continue editing the Calibrations, click Save in the Quick Access Toolbar. Then click Close when you are done.
  3. To save and close the Calibrations window, click Save.

 

Method 2

  1. Click against the Comment cell of a calibration row. A comment window will open.
  2. Modify the calibration details as required. To save your changes, click OK in the comment window.
  3. To save and close the Calibrations window, click Save. Then click Close when you are done.

 

Delete a Calibration

  1. Click to check the Delete checkbox(es) against any calibration(s) that you wish to delete.
  2. To save and continue editing the Calibrations, click Save in the Quick Access Toolbar. Then click Close when you are done.
  3. To save and close the Calibrations window, click Save.

Note

If you have made any changes to your calibration data, before selecting Close, you will be prompted to save your changes.

    • Related Articles

    • Equipment Calibration Page

      You can capture the calibration of equipment specified on the Variable Data page. Calibrations allow you to determine whether equipment is recording the correct value, or if it may need to be adjusted. Record a Calibration Use CALIBRATION DATE to ...

    • Equipment

      Add a Piece of Equipment Select the Equipment tab in the Main Panel. To add equipment, click New in the Quick Access Toolbar and a new row at the bottom of the Equipment table will be added. Click the Active checkbox to identify whether the Equipment ...

    • Video: Set Person & Equipment

      This video tutorial demonstrates how to set person and equipment in DataSight.

    • Navigation Menu

      Once your MDE Template is selected, the Navigation Menu can be used to access the Data Collection pages specified in the configuration. The navigation menu is located at the top left of the screen and allows you to navigate to a range of Collect data ...

    • Variable Data Page

      You can use the VARIABLE DATA page to enter data in a similar fashion to Manual Data Entry (MDE) in DataSight. LEVEL 3 displays the Level 3 that was selected on the Safety page. Collect Data The DATE and TIME fields are used to set the datetime ...