915U-2 Extended Modbus range
The 915U-2 wireless I/O has always been able to read and write to Modbus slave devices. Some devices however, have addresses outside of our normal range.
We have now extended the Modbus address range on the 915U-2 to allow destination registers to use the full 0 to 65535.
Related Articles
641M - Modbus Master
This document contains information regarding the configuration and use of the Modbus Master application and using it to poll or scan external Modbus TCP or RTU devices
245/U-E Modbus TCP to RTU
The purpose of this document is to show the configuration to setup Modbus TCP to RTU via a back to back pair of 245U-E or 945U-E Ethernet modems.
645M-4 Modbus TCP to RTU serial Conversion.
The following application note demonstrates the configuration of the ELPRO 645M-4 modem using the Modbus TCP to RTU conversion. This will allow serial devices to be connected to the RS232 on the terminal strip which can then be access via the TCPIP ...
245/945U-E Modbus TCP to RTU
The purpose of this document is to show the configuration to setup Modbus TCP to RTU via a back to back pair of 245U-E or 945U-E Ethernet modems.
105/905U-G Modbus + & Schneider, Momentum PLC
The purpose of this document is to provide the reader with instructions on interfacing a Schneider, Momentum PLC with a 105U/905U-G-M+1 Gateway using Modbus Plus communications.