245/U-E Modbus TCP to RTU

• Related Articles

• 245/945U-E Modbus TCP to RTU

  The purpose of this document is to show the configuration to setup Modbus TCP to RTU via a back to back pair of 245U-E or 945U-E Ethernet modems. 

• 645M-4 Modbus TCP to RTU serial Conversion.

  The following application note demonstrates the configuration of the ELPRO 645M-4 modem using the Modbus TCP to RTU conversion. This will allow serial devices to be connected to the RS232 on the terminal strip which can then be access via the TCPIP ...

• 641M - Modbus Master

  This document contains information regarding the configuration and use of the Modbus Master application and using it to poll or scan external Modbus TCP or RTU devices

• 915U-2 Extended Modbus range

  The 915U-2 wireless I/O has always been able to read and write to Modbus slave devices. Some devices however, have addresses outside of our normal range. We have now extended the Modbus address range on the 915U-2 to allow destination registers to ...

• 415U-2-E / 415U-C-E Serial Communication. V1.1

  The document illustrates how to setup a transparent serial communications link in a point to point application. This setup will use the Serial Gateway TCP Server and Client configuration options on the module’s serial web page. This document shows ...