645M-4 Modbus TCP to RTU serial Conversion.
The following application note demonstrates the configuration of the ELPRO 645M-4 modem using the Modbus TCP to RTU conversion. This will allow serial devices to be connected to the RS232 on the terminal strip which can then be access via the TCPIP either locally or via the WAN. This guide does not show how to provision the Cellular PPP Connection; details of this can be found in the quick start guide for the 645M-4.
Related Articles
245/945U-E Modbus TCP to RTU
The purpose of this document is to show the configuration to setup Modbus TCP to RTU via a back to back pair of 245U-E or 945U-E Ethernet modems.
245/U-E Modbus TCP to RTU
The purpose of this document is to show the configuration to setup Modbus TCP to RTU via a back to back pair of 245U-E or 945U-E Ethernet modems.
641M - Modbus Master
This document contains information regarding the configuration and use of the Modbus Master application and using it to poll or scan external Modbus TCP or RTU devices
915U-2 Extended Modbus range
The 915U-2 wireless I/O has always been able to read and write to Modbus slave devices. Some devices however, have addresses outside of our normal range. We have now extended the Modbus address range on the 915U-2 to allow destination registers to ...
215U-2-E Serial Communication Options
The document illustrates how to setup a transparent serial communications link in a point to point application. This setup will use the Serial Gateway TCP Server and Client configuration options on the module’s serial web page. Configuration is easy, ...