Firmware
915U-2 Firmware (V1.2.13)
Firmware files and install document. Current firmware Release is V1.2.13
Diagnostic & Statistics Registers.
Some of the radios have a range of internal registers that hold information on connectivity to other radios and useful radio statistical information.
915U-2 Extended Modbus range
The 915U-2 wireless I/O has always been able to read and write to Modbus slave devices. Some devices however, have addresses outside of our normal range. We have now extended the Modbus address range on the 915U-2 to allow destination registers to ...
915U-2 Factory Default a module
The following application note demonstrates how to clear out a configuration and factory default the module.
Over the Air Configuration for 915U-2
The 915U-2 modules communicate using Standard Ethernet Protocols which makes it possible to connect to other 915U-2 module within the radio network for over the air diagnostics or configuration changes. This instruction shows how this can be setup.
915U-2 Force/Startup mapping
The following application note demonstrates how to configure modules with a Force/Startup poll mapping. Communications of I/O from remote location back to the Base radio is done on a Change of State (COS) bases as well as a regular update period. The ...