Series filters in Saved View Charts cannot be changed

Series filters in Saved View Charts cannot be changed

Reported: October 4, 2018

Version(s) affected: DataSight 3.4 and below

Issue: When opening a Saved View chart with multiple variables, the individual series filters on the Filter Panel may have been dropped and the individual series tabs are not present.  The Saved View Chart shows all variables previously selected, with their original filter conditions, however the user is unable to change any filter conditions. The problem was caused by a bug present in Version 3.4 and below, where at times only the main filter condition was saved.

Workaround: As long as you do not need to change the filter conditions, the original Saved View Chart will present as originally saved.

Resolution: To be able to change the filter conditions after saving, the Saved View Chart will need to be rebuilt and re-saved.

Last Updated: October 10, 2018

    • Related Articles

    • Saved Views

      Datasheets, charts and reports may be created and then subsequently saved to the Saved Views Panel. This panel displays a tree list of all the saved views for the current database, each distinguished by a saved datasheet, saved chart or saved report ...

    • Embedded Charts in Reports Displaying Incorrectly

      Reported: May 16, 2019 Version(s) affected: DataSight 3.5 onwards Issue: Reports created in Report Designer with embedded charts may not display correctly when the report is previewed, printed or exported. This is due to the implementation of ...

    • View Task Log

      A log of each task undertaken by the service is automatically saved. View Logs In the Service Group on the Service Manager Ribbon, click View Logs. The View Logs window will appear in the main panel. Click View All Alternatively, select the Start and ...

    • Graphical View

      Follow the steps below to view graphical representation of data about Level 3 variable(s) in the data list: Click on a Level 3 from the Data List on the left. To view Graphical data, check the Selected Values box against all the variables you wish. ...

    • Reports in Saved Views

      Reports saved to the Saved Views may be opened and edited using different filter conditions than those originally saved with the report. This allows you to design a standard template for your reports that you can apply to different sets of data. ...