Radio configuration

Radio configuration

Radio configuration software and instruction to step you through configuring or adjusting the opearting frequency.
Zip file has a password which is "password"
You will need a radio programming cable (wiring details are in the document).

    • Related Articles

    • Legacy ERRTS Radio Config

      Software to program radio on older Legacy Radio Zip file password = "password"

    • Dashboard features and configuration.

      Some of our Wireless I/O and Ethernet I/O products have an inbuilt dashboard for displaying I/O values and status information via a web-based interface which can be used for diagnostics purposes. (currently only available in the 415U-2, 415U-E, ...

    • Dashboard features and configuration. V1.1

      Some of our Wireless I/O and Ethernet I/O products have an inbuilt dashboard for displaying I/O values and status information via a web-based interface which can be used for diagnostics purposes. (currently only available in the 415U-2, 415U-E, ...

    • Over the Air Configuration for 915U-2

      The 915U-2 modules communicate using Standard Ethernet Protocols which makes it possible to connect to other 915U-2 module within the radio network for over the air diagnostics or configuration changes. This instruction shows how this can be setup.

    • 645M-4 SMS I/O configuration

      ​The 645M-4 cellular modem has the ability to SMS the I/O alarms to a predetermined mobile phone or tablet and to get an up to date status of connected I/O values and other internal settings by send an SMS to the Modem.