I/O Plus (Logic) - Instruction and Examples

I/O Plus (Logic) - Instruction and Examples

This document explains the feature set of the “I/O Plus” logic which is available in some of the Wireless I/O products, notably the 415U-2, 415U-E, 215U-E and 115E-2. I/O Plus is made available to perform logic tasks to users in the available wireless products and is not intended on being utilised as a PLC or RTU replacement.
Configuration for the logic is performed via the module’s internal webpages.
The cycle time for the IO plus is fixed at 250msec with a maximum of 300 instructions per device

Contact support@elpro.com.au for a Demo Logic Application that will allow you to test the Logic operation.
Also there are a number of Example Logic ".sconf" files which can be loaded into the module using the Write configuration on the system tools page.


    • Related Articles

    • 245/U-E Modbus TCP to RTU

      The purpose of this document is to show the configuration to setup Modbus TCP to RTU via a back to back pair of 245U-E or 945U-E Ethernet modems. 

    • 450U-E Profibus Application

      The purpose of this document is to provide the reader with instruction for communicating Profibus DP using the 450U-E Ethernet Modems over RS485 serial connections.

    • 245-945U-E WDS Repeater Setups

      The purpose of this document is to illustrate how to setup simple repeater using WDS on the 245U-E or a 945U-E Ethernet Modem using different SSID's.

    • 450U-E filtering

      The 450U-E modem has a low data throughput, and any unnecessary traffic being sent over the radio could compromise the reliability of the wireless link. In many cases, the intended recipient of the broadcast traffic heard on the Ethernet port does ...

    • 245/945U-E Profibus DP

      The purpose of this document is to provide the reader with instructions for communicating Profibus DP using the 245U-E & 945U-E Ethernet Modems over RS485 serial connections.