Gaugings

Gaugings

DataSight provides a complete Gauging module under each Level 3. The Gauging module allows you to store all aspects of a manual gauging, including:

  • Summary site information,
  • Vertical observations (depth, depth of observation, point velocity, mean vertical observation, panel area and panel discharge),
  • Generation of stream gauging records, using either the mid-section or mean-section methods following International standards, and
  • Manual Override that allows you to enter summary information provided from Acoustic Doppler Current Meters, if required. The electronic file generated by Acoustic Doppler Current Meters can also be stored and linked to the specific gauging and Level 3.

 

Open Gaugings

  1. Navigate to the chosen Level 3 in the Levels Panel and click on a Level 3 to highlight it.
  2. Then right-click and select Gaugings. You can also click Gauging in the Input group of the DataSight Ribbon.

The Gaugings table appears in the Main Panel. This table lists all Gauging data entered for the specific Level 3 and some cursory details for each gauging.

    • Related Articles

    • Gaugings Reports

      Two reports have been designed for stream gauging data. These are the Gauging List report showing a selection of stream flow measurements and the Gauging Details report for an individual gauging, which provides a graphical representation of both the ...

    • Enter Gaugings

      Add a new Gauging Select the Gaugings tab in the Main Panel. Click New in the Quick Access Toolbar. You can also click on the Gaugings grouped tab on the ribbon and click New Gauging. The New Gauging window appears. Enter a meaningful title for the ...

    • Manual Overide of Gauging Parameters

      In DataSight, the calculated results are continuously and automatically refreshed after adding or editing Chainage measurements and are displayed in the same measurement units as the data being entered. However, there is also an option to override ...

    • Enter Chainages and Observations

      Add Chainages and Observations Select the Gaugings tab in the Main Panel. Either double click on the relevant Gauging row or once the selected gauging is highlighted, click on the Gaugings ribbon tab and then select New Chainage. The Chainage Window ...

    • Hydrographic Data

      Environmental scientists such as hydrologists or hydrograhers locate hydrometric stations on water bodies in order to monitor and understand the movement of water through a terrestrial environment. These constructed hydrometric stations, also known ...