Default Setup for a 905U-L-T & 905U-L-R’s

Default Setup for a 905U-L-T & 905U-L-R’s

This procedure explains the process of defaulting the 905U-L-T & 905U-L-R and then pairing them to a default
configuration.

    • Related Articles

    • Configuration for 1 x 905U-L-T to multiple 905U-L-R’s

      If you require a 905U-L-T to send signals to more than one 905U-L-R, we can configure any number of 905U-L-R with the same configuration , therefore allowing a input from the 905U-L-T (Digital or Analog) to be sent to multiple 905U-L-R outputs.

    • Factory Default a 215U-2

      Instruction to Factory Default a 215U-2 Wireless I/O module.

    • Factory Default 645M-4

      Factory Reset of the modem can be performed one of three ways. From the web page (see below). This button resets all configurations to factory default. After clicking the “Reset” button, a message will appear prompting you to confirm. By clicking ...

    • 915U-2 Factory Default a module

      The following application note demonstrates how to clear out a configuration and factory default the module.

    • Factory Default a 115E-2

      Instruction to Factory Default a 115E-2 EthernetI/O module.