Checking serial communications using Putty Terminal

• Related Articles

• Checking Anybus versions using Putty Terminal

  This procedure shows how to connect to the ELPRO 105U-G/905U-G Gateway modules serial interface using the Putty terminal application to check the Anybus Fieldbus card firmware version.

• Monitoring Comms (Gateways) using Putty Terminal

  This procedure explains how to setup and connect to the ELPRO 105/905U-G Gateway modules serial interface using the Putty terminal application for diagnostic Comms Logging.

• 215U-2-E Serial Communication Options

  The document illustrates how to setup a transparent serial communications link in a point to point application. This setup will use the Serial Gateway TCP Server and Client configuration options on the module’s serial web page. Configuration is easy, ...

• 645M-4 Serial Client & Serial Server

  The following application note demonstrates the configuration of the ELPRO 645M-4 modem utilizing the Serial Client and Serial Server for a point to point RS232 connection. The 645M-4 supports RS232 only and in a point to Point configuration. This ...

• 415U-2-E / 415U-C-E Serial Communication. V1.1

  The document illustrates how to setup a transparent serial communications link in a point to point application. This setup will use the Serial Gateway TCP Server and Client configuration options on the module’s serial web page. This document shows ...