641M V2 Applications

641M V2 Applications

The ELPRO 641M IOT Connectivity 4G-LTE Router has a comprehensive set of functions that are built in from the factory.
There are also several additional applications that also be loaded into the unit to include additional features.
The units shipped from the factory will include 5 applications pre-loaded which are commonly used in industrial applications.

Version 2 Apps are for use in Firmware V3.0.0 Modems.

Attachments is an application note that outlines the upload process as well as a Zipped file will all V2 applications.


    • Related Articles

    • 641M V1 Applications

      The ELPRO 641M IOT Connectivity 4G-LTE Router has a comprehensive set of functions that are built in from the factory. There are also several additional applications that also be loaded into the unit to include additional features. The units shipped ...

    • 805/905U-D Profibus Applications

      The ELPRO 805U/905U-D radio modems may be used to extend a Profibus Network. The Profibus network must be configured to account for the increased delays in data transmission caused by the radio modems. Also, the profibus network must be connected to ...

    • ALERT2 Gateway-Decoder Quickstart Configuration Guide

      The ELPRO 115E-2 gateway-decoder supports environmental or industrial protocols using ethernet, RS-232 or RS-485 serial connectivity and provide gateway functionality with built in IO for sharing environmental data with industrial applications.

    • 641M - IPSec_Pre shared key with CISCO router

      This document contains information regarding the configuration and use of IPSec_Pre-shared key with CISCO router.

    • 641M - IPSec_FQDN_Pre shared key and X auth with CISCO router

      This document contains information regarding the configuration and use of IPSec_FQDN_Pre shared key and Xauth with CISCO router