The gateway provides an interface between the 641M local inputs and/or Modbus RTU/TCP master-slave external devices using SparkplugB (SpB) protocol commonly used in industrial IoT applications.
The ELPRO 115E-2 gateway-decoder supports environmental or industrial protocols using ethernet, RS-232 or RS-485 serial connectivity and provide gateway functionality with built in IO for sharing environmental data with industrial applications.
This procedure shows how to connect to the ELPRO 105U/905U-G-ET1 Gateway Ethernet connection to monitor comms using the E-Series configuration Software.
This procedure explains how to connect to the ELPRO 105/905U-G-ET1 Gateway modules serial interface using E-Series configuration Utility to monitor some internal diagnostic buffer count registers.
This procedure explains how to connect to the ELPRO 105/905U-G-ET1 Gateway modules Ethernet interface using E-Series configuration Utility to monitor some internal diagnostic buffer count registers.
Radio configuration software and instruction to step you through configuring or adjusting the opearting frequency. Zip file has a password which is "password" You will need a radio programming cable (wiring details are in the document).