641M - L2TP Client with Cisco

• Related Articles

• 641M - PPTP Client with Cisco

  This document contains information regarding the configuration and use of PPTP client with cisco.

• Configuration for 1 x 905U-L-T to multiple 905U-L-R’s

  If you require a 905U-L-T to send signals to more than one 905U-L-R, we can configure any number of 905U-L-R with the same configuration , therefore allowing a input from the 905U-L-T (Digital or Analog) to be sent to multiple 905U-L-R outputs.

• 245-945U-E Serial Server/Client

  The purpose of this document is to illustrate how to setup the Serial Server/Client on the 245U-E or a 945U-E Ethernet Modem. This will allow transparent connection between back to back modem RS232 or RS485 serial ports.

• 245-945U-E Serial Server/Client

  The purpose of this document is to illustrate how to setup the Serial Server/Client on the 245U-E or a 945U-E Ethernet Modem. This will allow transparent connection between back to back modem RS232 or RS485 serial ports.

• 645M-4 Serial Client & Serial Server

  The following application note demonstrates the configuration of the ELPRO 645M-4 modem utilizing the Serial Client and Serial Server for a point to point RS232 connection. The 645M-4 supports RS232 only and in a point to Point configuration. This ...