215U-2-E Serial Communication Options
The document
illustrates how to setup a transparent serial communications link in a point to
point application. This setup will use the Serial Gateway TCP Server and Client
configuration options on the module’s serial web page.
Configuration
is easy, you just need to choose the appropriate serial port and select
configuration parameters as per below.
There
are other possible configuration options for serial communications which will
also be briefly explained at the end of the document.
Related Articles
645M-4 Serial Client & Serial Server
The following application note demonstrates the configuration of the ELPRO 645M-4 modem utilizing the Serial Client and Serial Server for a point to point RS232 connection. The 645M-4 supports RS232 only and in a point to Point configuration. This ...
245-945U-E Serial Server/Client
The purpose of this document is to illustrate how to setup the Serial Server/Client on the 245U-E or a 945U-E Ethernet Modem. This will allow transparent connection between back to back modem RS232 or RS485 serial ports.
245-945U-E Serial Server/Client
The purpose of this document is to illustrate how to setup the Serial Server/Client on the 245U-E or a 945U-E Ethernet Modem. This will allow transparent connection between back to back modem RS232 or RS485 serial ports.
415U-E Serial Communication Options
The document illustrates how to setup a transparent serial communications link in a point to point application. This setup will use the Serial Gateway TCP Server and Client configuration options on the module’s serial web page. This document shows ...
415U-2-E / 415U-C-E Serial Communication. V1.1
The document illustrates how to setup a transparent serial communications link in a point to point application. This setup will use the Serial Gateway TCP Server and Client configuration options on the module’s serial web page. This document shows ...